SINET™ Color LCD

The E-BikeKit SINET™ 3.5″ Color LCD is the current display used with E-BikeKit SINET™ electric bike and trike conversion systems.

It provides clear ride information, system status, pedal-assist control, diagnostics, and access to commonly used programming settings.

• 3.5″ full-color LCD
• USB charging port
• Battery level and voltage display
• Current speed, trip distance, and odometer
• Pedal-assist level selection
• Walk-assist mode
• Error diagnostics
• Advanced programming menu
• Compatible with current SINET™ cadence and torque-sensing systems

Important Compatibility Notice: This LCD is designed exclusively for current E-BikeKit SINET™ systems. It is not compatible with Legacy E-BikeKit or E-TrikeKit electronics, Rescue Pack systems, previous-generation controllers and wiring, or third-party electrical systems.

The SINET™ Color LCD is the replacement and service display for current-generation E-BikeKit SINET™ conversion systems.

The large 3.5″ color screen provides the rider with important system and ride information while also serving as the primary interface for pedal-assist selection, diagnostics, and system programming.

The LCD connects directly to the matching SINET™ wiring system using the current waterproof connector architecture. Because display communication and programming must match the controller and other electrical components, this LCD should only be used with a complete SINET™ electrical system.

If you are replacing a display and are unsure whether your existing E-BikeKit system is SINET™ or Legacy, please contact us before ordering. Photos of your current display and electrical connectors are usually enough for us to identify the correct generation.

• Display Size: 3.5″
• Display Type: Full-color LCD
• USB Charging Port: Included
• Battery Information: Battery level and voltage
• Speed Information: Current speed, maximum speed, and average speed
• Trip Information: Trip distance and odometer
• Pedal Assist: Assist-level selection
• Walk Assist: Included
• Diagnostics: Error-code display
• Programming: Access to system settings and configuration menus

Watch the video below for an overview of the SINET™ LCD, including initial setup, programming, display operation, and commonly used system settings.

Watch the SINET™ LCD Programming Guide on YouTube

Download the SINET™ LCD quick-start guide for display operation, initial setup, programming, system settings, and commonly used functions.

Download the SINET™ LCD Quick-Start Guide (PDF)

Compatible With:

• Current E-BikeKit SINET™ conversion systems
• SINET™ integrated controllers
• SINET™ external controllers
• SINET™ main wiring harnesses
• SINET™ thumb throttles
• SINET™ locking e-brake levers
• SINET™ cadence sensors
• SINET™ bottom bracket torque sensors

Not Compatible With:

• Previous-generation E-BikeKit LCD displays
• Legacy E-BikeKit or E-TrikeKit controllers
• Legacy wiring harnesses and controls
• Legacy Rescue Pack systems
• Third-party controllers or wiring systems

Matching connectors alone do not confirm compatibility. The LCD, controller, wiring harness, sensors, throttle, and brake inputs must all be part of the SINET™ electrical platform.

• Brand: E-BikeKit
• Platform: SINET™
• Display: 3.5″ full-color LCD
• USB Charging Port: Included
• System Voltage: 48V SINET™ systems
• Controller Compatibility: SINET™ integrated and external controllers
• Pedal-Assist Compatibility: Cadence sensor or bottom bracket torque sensor
• Throttle Compatibility: SINET™ thumb throttle
• Brake-Cutoff Compatibility: SINET™ locking e-brake levers
• Connection: Matched SINET™ waterproof connector
• Mounting: Handlebar mounting hardware included

• E-BikeKit SINET™ 3.5″ Color LCD
• LCD control buttons
• Handlebar mounting hardware
• Pre-wired SINET™ connector

• Confirm your system uses current SINET™ electronics before ordering
• Connect only to the matching SINET™ main wiring harness
• Do not connect this LCD to Legacy E-BikeKit or E-TrikeKit controllers or wiring
• Confirm wheel size, assist behavior, and system settings after installation
• Use the programming video and Quick-Start Guide above for initial setup

Incorrect settings may affect displayed speed, distance, assist behavior, or system operation.

Not sure whether you have a SINET™ or Legacy E-BikeKit system? Contact us before ordering and we can help identify the correct component.

Questions? Call us toll-free at 1-866-882-3245, Monday–Friday, 9am–5pm ET, or email support@ebikekit.com.