Description
E-BikeKit™ Rear 500-1000w Direct Drive Hub Motor Conversion Kit w/ Pedal-Assist and Throttle On Demand functions. New programmable LCD!
This electric bike conversion kit isn't with a battery pack. It's for riders that want the simplicity and reliability of the 500w direct drive hub motor and the option of supplying their own 36 or 48 volts battery pack. Direct drive motors are strong, durable, and long-lasting due to zero internal friction.
Who's it for? This kit is ideal for heavier applications with total loads (rider and gear) over 250 lbs.
Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (Ah) battery specification is an indication of a battery's capacity. A battery capacity of 10Ah will typically deliver 20 miles / 32 km range.
The E-BikeKit™ is designed for convenience, performance, and reliability.
With an LCD dashboard control panel and 36v/48v 12FET controller, the system is easy to install and even easier to use. All E-BikeKit system components are compatible with both 36 volt and 48 volt battery packs. The controller and LCD are also compatible with all motor types offered by E-BikeKit.
Learn More: Top 25 FAQ | Front vs Rear Wheel | Compatibility | Pedal Assist Compatibility
Note: Our kits include parts to fit a wide variety of bikes, but do not fit every bike without modification or extra parts. Our representatives are available to help with compatibility questions and make recommendations on additional parts that you may need.
Helpful Resources: Helpful Videos | Owner's Manuals
Questions? Call us toll-free at 1-866-882-3245 and an experienced professional can assist you. Monday - Friday 9 am - 5 pm EST. Outside of business hours get help fast via e-mail.
Motor Specs
Brand: Electric Bike Technologies, Inc.
Type: Direct Drive (Brushless, and disc brake compatible)
Power: 500w Nominal / > 1000 @ 48v
Max Torque: 46Nm @ 48v
Max RPM: 259 @ 48v
Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect
Connector: Round 8-Pin 19/32" (10.4mm)
Weight: 12.8 lbs (5.8 kg)
Warranty: 1 Year (up to 48v w/ 600 lbs max load)
Includes
Every E-BikeKit conversion kit comes with all of the parts you'll need for your conversion.
• USA Hand-Built Wheel w/ Disc-Brake Compatible Hub Motor
• 36/48V Compatible 22Amp 12FET Controller
• Programmable LCD Dashboard
• PAS 12-Magnet Split Disc
• PAS Sensor Left Side Mount (Right side mount by request only)
• Thumb or Split-Twist Throttle
• Left and Right E-Brake Levers
• Motor Cable
• 4-to-1 Accessory Cable
• Battery Wire Harness (Only included if there's no battery kit)
• Freewheel
• Zip Ties, C-Washers, and Torque Arms in every kit!
