Shopping Cart - $0.00

You have no items in your shopping cart.

Recently added item(s)
Total: $0.00

Performance E-BikeKit™
No Battery - Rear Wheel

  • $598.00 - $738.00

Product Code: GR26-7

e-bikekit-geared-500w-rear-wheel-conversion-kit

E-Bike Kit Dealers

Search for an authorized E-BikeKitTM Dealer near YOU!

Loading store locator from Stockist store locator...

No Dealer in Your Area ?

Click here to search for local bike shops in your area Once you find a bike shop , we would encourage you to forward them this New Dealer Application Link
Onboarding is easy and fast. Your local dealer can offer you any of our products and help with conversion if required.
Still need help finding a dealer? Email: support@ebikekit.com

Description


E-BikeKit Rear 500-1000w Geared Hub Motor Conversion Kit with Pedal-Assist and Throttle-on-Demand functions. New Programmable LCD!

The E-BikeKit 500-1000w geared conversion kit is powered by an internal 5:1 planetary gear hub motor with a clutch. The clutch in the geared motor offers zero drag when pedaling and not engaging battery power. This motor is more efficient, resulting in increased range (especially with "start/stop" riding), has more starting torque, and has greater hill-climbing ability than a direct drive motor of equal power rating. The motor is also smaller in diameter for increased stealth and 3.4 lbs lighter than the 500w direct drive.

Dropout Spacing:

This hub is spaced to 170mm w/ 15mm disc-offset for Fatbike rear wheels.

We can also space it to 190mm for use without a disc brake

If you have a bike that uses a rear disc brake and 190mm spacing, we can include disc rotor shims and screws to help line the disc up for 15mm disc offset.

Who's it for? This kit is for anyone wanting the best of the best in performance, efficiency, weight, and stealth. There is a 300 lbs total load limit, so if you plan on more than that, look to a direct-drive motor.

Conversion Kit Specs:
Watts (Nominal/Peak): 500-1000w (EBK 22Amp Controller)
Top Speed: Approx. 28 mph @4 8v in 26" wheel
Range: Depends on Battery Capacity (AH) and based on rider weight, input and terrain contingent.
Performance: High
Efficiency: High
Stealth Factor: High
Battery: Not Included
Charger: Not Included

Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (AH) battery specification is an indication of a battery's capacity. A battery capacity of 10Ah will typically deliver 20 miles / 32kms range.


Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are: 16", 20", 24", 26", 700c, and 29er. Acceptable tire widths for the E-BikeKit rims: 1.15" (29mm) - 2.25" (57mm).

Freewheel Choice and OLD Spacing: Our motors are intended for a 7-speed freewheel and provide 135mm OLD (dropout) spacing with a 7-speed freewheel and 15mm disc-offset.

When using an 8, 9, or 10-speed freewheel, this will increase the OLD by about 3.5mm per speed. When we assemble the motor here, we will dish and space it correctly to fit this. To install the wider wheel, you may need to spread the dropouts of the bike open in order to fit.

If you are not using disc brakes, so don't need the 15mm disc-offset, we can reconfigure the spacing to fit 135mm in many cases.

Learn More: Top 25 FAQ | Front vs Rear Wheel | Compatibility | Pedal Assist Compatibility

Note: Our kits include parts to fit a wide variety of bikes, but do not fit every bike without modification or extra parts. Our representatives are available to help with compatibility questions and make recommendations on additional parts that you may need.

Helpful Resources: Helpful Videos | Owner's Manuals

Questions? Call us toll-free at 1-866-882-3245 and an experienced professional can assist you. Monday – Friday 9 am-5 pm EST. Outside of business hours get help fast via e-mail.

Motor Specs


Brand: Electric Bike Technologies, Inc.
Type: Internally Geared (brushless, and disc brake compatible)
Power: 500w nominal / > 1000w @ 48v
Max Torque: 84Nm @ 48v
Max RPM: 320 @ 48v
Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect
Connector: Round 8-Pin 13/32" (10.4mm)
Weight: 9.4lbs (4.26 kg)
Warranty: 1 Year (up to 48v - 300 lbs max load)

Note: The geared 500w “Performance” Motors feature an internal clutch to reduce drag, and can not read speed or mileage when not in use.

Includes


Every E-BikeKit conversion kit comes with all of the parts you'll need for your conversion.

1 x USA Hand-Built Wheel w/ Disc-Brake Compatible Hub Motor
1 x 36/48V Compatible 22Amp 12FET Controller
1 x Programmable LCD Dashboard
1 x PAS 12-Magnet Split Disc
1 x PAS Sensor Left Side Mount (right side mount by request only)
2 x 1 Thumb and 1 Split-Twist Throttle
2 x Left and Right E-Brake Levers
1 x Motor Cable
1 x Accessory Cable
1 x Battery Wire Harness (kits w/out batteries only)
1 x 7-Speed Shimano Freewheel (rears only)
1 x Owner's Manual (an online PDF)
**Zip Ties, C-Washers, and Torque Arms in Every Kit!

E-BikeKit Rear 500-1000w Geared Hub Motor Conversion Kit with Pedal-Assist and Throttle-on-Demand functions. New Programmable LCD!

The E-BikeKit 500-1000w geared conversion kit is powered by an internal 5:1 planetary gear hub motor with a clutch. The clutch in the geared motor offers zero drag when pedaling and not engaging battery power. This motor is more efficient, resulting in increased range (especially with "start/stop" riding), has more starting torque, and has greater hill-climbing ability than a direct drive motor of equal power rating. The motor is also smaller in diameter for increased stealth and 3.4 lbs lighter than the 500w direct drive.

Dropout Spacing:

This hub is spaced to 170mm w/ 15mm disc-offset for Fatbike rear wheels.

We can also space it to 190mm for use without a disc brake

If you have a bike that uses a rear disc brake and 190mm spacing, we can include disc rotor shims and screws to help line the disc up for 15mm disc offset.

Who's it for? This kit is for anyone wanting the best of the best in performance, efficiency, weight, and stealth. There is a 300 lbs total load limit, so if you plan on more than that, look to a direct-drive motor.

Conversion Kit Specs:
Watts (Nominal/Peak): 500-1000w (EBK 22Amp Controller)
Top Speed: Approx. 28 mph @4 8v in 26" wheel
Range: Depends on Battery Capacity (AH) and based on rider weight, input and terrain contingent.
Performance: High
Efficiency: High
Stealth Factor: High
Battery: Not Included
Charger: Not Included

Any battery chemistry (Li-ion, LiFePO4, Lithium Manganese, Lead-Acid, etc.) is acceptable, as long as the voltage is 36v or 48v AND the battery is capable of 22Amp continuous discharge. The Amp Hour (AH) battery specification is an indication of a battery's capacity. A battery capacity of 10Ah will typically deliver 20 miles / 32kms range.


Choosing Your Wheel Size: You can find your wheel size written on your tire. Available size options for this conversion kit are: 16", 20", 24", 26", 700c, and 29er. Acceptable tire widths for the E-BikeKit rims: 1.15" (29mm) - 2.25" (57mm).

Freewheel Choice and OLD Spacing: Our motors are intended for a 7-speed freewheel and provide 135mm OLD (dropout) spacing with a 7-speed freewheel and 15mm disc-offset.

When using an 8, 9, or 10-speed freewheel, this will increase the OLD by about 3.5mm per speed. When we assemble the motor here, we will dish and space it correctly to fit this. To install the wider wheel, you may need to spread the dropouts of the bike open in order to fit.

If you are not using disc brakes, so don't need the 15mm disc-offset, we can reconfigure the spacing to fit 135mm in many cases.

Learn More: Top 25 FAQ | Front vs Rear Wheel | Compatibility | Pedal Assist Compatibility

Note: Our kits include parts to fit a wide variety of bikes, but do not fit every bike without modification or extra parts. Our representatives are available to help with compatibility questions and make recommendations on additional parts that you may need.

Helpful Resources: Helpful Videos | Owner's Manuals

Questions? Call us toll-free at 1-866-882-3245 and an experienced professional can assist you. Monday – Friday 9 am-5 pm EST. Outside of business hours get help fast via e-mail.

Brand: Electric Bike Technologies, Inc.
Type: Internally Geared (brushless, and disc brake compatible)
Power: 500w nominal / > 1000w @ 48v
Max Torque: 84Nm @ 48v
Max RPM: 320 @ 48v
Cable: 8" Axle Exit, 3-Phase / 5 Hall Effect
Connector: Round 8-Pin 13/32" (10.4mm)
Weight: 9.4lbs (4.26 kg)
Warranty: 1 Year (up to 48v - 300 lbs max load)

Note: The geared 500w “Performance” Motors feature an internal clutch to reduce drag, and can not read speed or mileage when not in use.

Every E-BikeKit conversion kit comes with all of the parts you'll need for your conversion.

1 x USA Hand-Built Wheel w/ Disc-Brake Compatible Hub Motor
1 x 36/48V Compatible 22Amp 12FET Controller
1 x Programmable LCD Dashboard
1 x PAS 12-Magnet Split Disc
1 x PAS Sensor Left Side Mount (right side mount by request only)
2 x 1 Thumb and 1 Split-Twist Throttle
2 x Left and Right E-Brake Levers
1 x Motor Cable
1 x Accessory Cable
1 x Battery Wire Harness (kits w/out batteries only)
1 x 7-Speed Shimano Freewheel (rears only)
1 x Owner's Manual (an online PDF)
**Zip Ties, C-Washers, and Torque Arms in Every Kit!


Customer Reviews

Customer Reviews

Based on 6 reviews Write a review