{"title":"SINET Components","description":"\u003cp\u003e\u003cstrong\u003eCurrent-generation replacement components for E-BikeKit SINET™ systems.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eShop displays, controllers, controls, wiring, and pedal-assist components for the current SINET™ electrical platform.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility Notice:\u003c\/strong\u003e SINET™ components are generally not compatible with previous-generation E-BikeKit or E-TrikeKit electrical systems unless the individual product specifically states otherwise. If you're unsure which system you have, contact us before ordering.\u003c\/p\u003e","products":[{"product_id":"sinet-color-lcd","title":"SINET™ Color LCD","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ 3.5″ Color LCD\u003c\/strong\u003e is the current display used with\n    E-BikeKit SINET™ electric bike and trike conversion systems.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    It provides clear ride information, system status, pedal-assist control,\n    diagnostics, and access to commonly used programming settings.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e3.5″ full-color LCD\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eUSB charging port\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eBattery level and voltage display\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eCurrent speed, trip distance, and odometer\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003ePedal-assist level selection\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eWalk-assist mode\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eError diagnostics\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eAdvanced programming menu\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eCompatible with current SINET™ cadence and torque-sensing systems\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This LCD is designed exclusively for current\n    \u003cstrong\u003eE-BikeKit SINET™ systems\u003c\/strong\u003e. It is\n    \u003cstrong\u003enot compatible with Legacy E-BikeKit or E-TrikeKit electronics\u003c\/strong\u003e,\n    Rescue Pack systems, previous-generation controllers and wiring, or\n    third-party electrical systems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eSINET™ Color LCD\u003c\/strong\u003e is the replacement and service display\n    for current-generation E-BikeKit SINET™ conversion systems.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The large 3.5″ color screen provides the rider with important system and ride\n    information while also serving as the primary interface for pedal-assist\n    selection, diagnostics, and system programming.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The LCD connects directly to the matching SINET™ wiring system using the\n    current waterproof connector architecture. Because display communication and\n    programming must match the controller and other electrical components,\n    this LCD should only be used with a complete SINET™ electrical system.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    If you are replacing a display and are unsure whether your existing\n    E-BikeKit system is SINET™ or Legacy, please contact us before ordering.\n    Photos of your current display and electrical connectors are usually enough\n    for us to identify the correct generation.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDisplay Features\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisplay Size:\u003c\/strong\u003e 3.5″\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisplay Type:\u003c\/strong\u003e Full-color LCD\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUSB Charging Port:\u003c\/strong\u003e Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBattery Information:\u003c\/strong\u003e Battery level and voltage\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpeed Information:\u003c\/strong\u003e Current speed, maximum speed, and average speed\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTrip Information:\u003c\/strong\u003e Trip distance and odometer\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePedal Assist:\u003c\/strong\u003e Assist-level selection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWalk Assist:\u003c\/strong\u003e Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDiagnostics:\u003c\/strong\u003e Error-code display\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e Access to system settings and configuration menus\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eProgramming \u0026amp; Setup Video\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Watch the video below for an overview of the SINET™ LCD, including initial\n    setup, programming, display operation, and commonly used system settings.\n  \u003c\/p\u003e\n\n  \u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%;\"\u003e\n    \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/5WqVGWkOd6o?si=rMe_RJZ8reysI6_b\" title=\"E-BikeKit SINET LCD Programming Guide\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\n    \u003c\/iframe\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003e\n    \u003ca href=\"https:\/\/www.youtube.com\/watch?v=5WqVGWkOd6o\" target=\"_blank\" rel=\"noopener\"\u003e\n      Watch the SINET™ LCD Programming Guide on YouTube\n    \u003c\/a\u003e\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eLCD Quick-Start Guide\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Download the SINET™ LCD quick-start guide for display operation, initial\n    setup, programming, system settings, and commonly used functions.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0676\/4701\/2906\/files\/EBK_DS103-2-Quickstart_Guide.pdf?v=1784229660\" target=\"_blank\" rel=\"noopener\"\u003e\n      Download the SINET™ LCD Quick-Start Guide (PDF)\n    \u003c\/a\u003e\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ integrated controllers\u003c\/li\u003e\n    \u003cli\u003eSINET™ external controllers\u003c\/li\u003e\n    \u003cli\u003eSINET™ main wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eSINET™ thumb throttles\u003c\/li\u003e\n    \u003cli\u003eSINET™ locking e-brake levers\u003c\/li\u003e\n    \u003cli\u003eSINET™ cadence sensors\u003c\/li\u003e\n    \u003cli\u003eSINET™ bottom bracket torque sensors\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003ePrevious-generation E-BikeKit LCD displays\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit or E-TrikeKit controllers\u003c\/li\u003e\n    \u003cli\u003eLegacy wiring harnesses and controls\u003c\/li\u003e\n    \u003cli\u003eLegacy Rescue Pack systems\u003c\/li\u003e\n    \u003cli\u003eThird-party controllers or wiring systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connectors alone do not confirm compatibility.\u003c\/strong\u003e\n    The LCD, controller, wiring harness, sensors, throttle, and brake inputs must\n    all be part of the SINET™ electrical platform.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSystem Specifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 3.5″ full-color LCD\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUSB Charging Port:\u003c\/strong\u003e Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSystem Voltage:\u003c\/strong\u003e 48V SINET™ systems\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eController Compatibility:\u003c\/strong\u003e SINET™ integrated and external controllers\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePedal-Assist Compatibility:\u003c\/strong\u003e Cadence sensor or bottom bracket torque sensor\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThrottle Compatibility:\u003c\/strong\u003e SINET™ thumb throttle\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrake-Cutoff Compatibility:\u003c\/strong\u003e SINET™ locking e-brake levers\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Matched SINET™ waterproof connector\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Handlebar mounting hardware included\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eE-BikeKit SINET™ 3.5″ Color LCD\u003c\/li\u003e\n    \u003cli\u003eLCD control buttons\u003c\/li\u003e\n    \u003cli\u003eHandlebar mounting hardware\u003c\/li\u003e\n    \u003cli\u003ePre-wired SINET™ connector\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eConfirm your system uses current SINET™ electronics before ordering\u003c\/li\u003e\n    \u003cli\u003eConnect only to the matching SINET™ main wiring harness\u003c\/li\u003e\n    \u003cli\u003eDo not connect this LCD to Legacy E-BikeKit or E-TrikeKit controllers or wiring\u003c\/li\u003e\n    \u003cli\u003eConfirm wheel size, assist behavior, and system settings after installation\u003c\/li\u003e\n    \u003cli\u003eUse the programming video and Quick-Start Guide above for initial setup\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Incorrect settings may affect displayed speed, distance, assist behavior,\n    or system operation.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether you have a SINET™ or Legacy E-BikeKit system?\n    Contact us before ordering and we can help identify the correct component.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"ebikekit","offers":[{"title":"Default Title","offer_id":67594636361896,"sku":"SINET-LCD-COLOR","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-LCD_15967e5e-1053-46f8-849e-bca57761969e.png?v=1790848645"},{"product_id":"sinet-motor-controller","title":"SINET™ Motor Controller","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Motor Controller\u003c\/strong\u003e is the current controller\n    for E-BikeKit SINET™ electric bike and trike conversion systems.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e48V SINET™ electrical platform\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eChoose Integrated or External controller\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eCurrent 5-pin locking battery connection\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOptional 2-prong battery adapter\u003c\/strong\u003e for compatible older E-BikeKit batteries\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eCompatible with SINET™ cadence and torque-sensing pedal assist\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eSupports SINET™ throttle and brake-cutoff inputs\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This controller is designed exclusively for the current\n    \u003cstrong\u003eE-BikeKit SINET™ electrical system\u003c\/strong\u003e. It is\n    \u003cstrong\u003enot compatible\u003c\/strong\u003e with previous-generation E-BikeKit controllers,\n    LCDs, wiring harnesses, Rescue Pack systems, or third-party electrical systems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eController Types\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eIntegrated Controller\u003c\/strong\u003e — Designed specifically for the current\n    SINET™ 48V 15Ah integrated battery cradle. The controller is housed in the\n    battery cradle for a clean installation with fewer external components.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eExternal Controller\u003c\/strong\u003e — Designed for current SINET™\n    external-controller systems where the controller is mounted separately from\n    the battery.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Select the controller type that matches your SINET™ system. If you are unsure\n    which version you need, contact us before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eBattery Connection Options\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eLatest 5-Pin Locking Connection\u003c\/strong\u003e — Standard connection for\n      current SINET™ batteries.\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      \u003cstrong\u003eInclude 2-Prong Adapter\u003c\/strong\u003e — Adds an adapter for connecting\n      compatible older E-BikeKit batteries equipped with the previous-generation\n      2-prong battery connector.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant:\u003c\/strong\u003e The optional 2-prong adapter changes only the\n    \u003cstrong\u003ebattery power connection\u003c\/strong\u003e. It does not make Legacy LCDs,\n    wiring harnesses, throttles, brake controls, pedal-assist sensors, or other\n    previous-generation electronics compatible with SINET™.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    If you are unsure which battery connection you have, send us a clear photo of\n    the battery connector before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ 3.5″ Color LCD\u003c\/li\u003e\n    \u003cli\u003eSINET™ wiring harness\u003c\/li\u003e\n    \u003cli\u003eSINET™ thumb throttle\u003c\/li\u003e\n    \u003cli\u003eSINET™ locking e-brake levers\u003c\/li\u003e\n    \u003cli\u003eSINET™ cadence sensor\u003c\/li\u003e\n    \u003cli\u003eSINET™ bottom bracket torque sensor\u003c\/li\u003e\n    \u003cli\u003eCurrent SINET™ batteries and battery connections\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003ePrevious-generation E-BikeKit controllers\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit or E-TrikeKit LCDs\u003c\/li\u003e\n    \u003cli\u003eLegacy wiring harnesses and controls\u003c\/li\u003e\n    \u003cli\u003eLegacy Rescue Pack electrical systems\u003c\/li\u003e\n    \u003cli\u003eThird-party electrical systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connectors alone do not confirm compatibility.\u003c\/strong\u003e\n    The controller and connected control components must belong to the SINET™\n    electrical platform.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    SINET™ is a matched waterproof electrical platform connecting the controller,\n    LCD, throttle, brake cutoffs, motor, battery, and pedal-assist components.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eSINET™ 3.5″ Color LCD support\u003c\/li\u003e\n    \u003cli\u003eThumb throttle support\u003c\/li\u003e\n    \u003cli\u003eCadence pedal-assist support\u003c\/li\u003e\n    \u003cli\u003eBottom bracket torque-sensor support\u003c\/li\u003e\n    \u003cli\u003eBrake-cutoff support\u003c\/li\u003e\n    \u003cli\u003eMatched SINET™ electrical connections\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSystem Specifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSystem Voltage:\u003c\/strong\u003e 48V\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eController Types:\u003c\/strong\u003e Integrated or External\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIntegrated Compatibility:\u003c\/strong\u003e Current SINET™ 48V 15Ah integrated battery cradle\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisplay Compatibility:\u003c\/strong\u003e SINET™ 3.5″ Color LCD\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBattery Connection:\u003c\/strong\u003e Current 5-pin locking connection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOptional Battery Connection:\u003c\/strong\u003e 2-prong battery adapter\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThrottle Compatibility:\u003c\/strong\u003e SINET™ thumb throttle\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePedal-Assist Compatibility:\u003c\/strong\u003e Cadence or bottom bracket torque sensor\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrake-Cutoff Compatibility:\u003c\/strong\u003e SINET™ locking e-brake levers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eSINET™ Motor Controller in the selected Integrated or External configuration\u003c\/li\u003e\n    \u003cli\u003eFactory-installed SINET™ wiring\u003c\/li\u003e\n    \u003cli\u003eCurrent 5-pin battery connection\u003c\/li\u003e\n    \u003cli\u003e2-prong battery adapter when selected\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Other SINET™ components are sold separately unless included as part of a\n    complete conversion system.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eConfirm your system uses current SINET™ electronics before ordering\u003c\/li\u003e\n    \u003cli\u003eConfirm Integrated or External controller type\u003c\/li\u003e\n    \u003cli\u003eConfirm the required battery connection\u003c\/li\u003e\n    \u003cli\u003eConnect only to matching SINET™ electrical components\u003c\/li\u003e\n    \u003cli\u003eDo not mix Legacy E-BikeKit electronics with SINET™ components\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    If you are replacing an existing controller and are unsure which version you\n    need, send us photos of the controller, battery connection, LCD, and wiring\n    before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Need help identifying the correct controller or battery connection?\n    Contact us before ordering and we'll help confirm the correct configuration.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"ebikekit","offers":[{"title":"Integrated \/ Latest 5-Pin Locking","offer_id":67594644488360,"sku":"SINET-CTRL-INT","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Integrated \/ Include 2-Prong Adapter","offer_id":67594644521128,"sku":"SINET-CTRL-INT-2P","price":110.0,"currency_code":"USD","in_stock":true},{"title":"External \/ Latest 5-Pin Locking","offer_id":67594649534632,"sku":"SINET-CTRL-EXT","price":138.0,"currency_code":"USD","in_stock":true},{"title":"External \/ Include 2-Prong Adapter","offer_id":67594649567400,"sku":"SINET-CTRL-EXT-2P","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-CONTROLERS-EXPLAINED.png?v=1790943328"},{"product_id":"sinet-locking-e-brake-levers","title":"SINET™ Locking E-Brake Levers","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Locking E-Brake Levers\u003c\/strong\u003e are long-pull\n    mechanical brake levers designed for current E-BikeKit SINET™ electric bike\n    and trike conversion systems.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Each lever combines normal mechanical braking with an\n    \u003cstrong\u003eelectrical motor cutoff\u003c\/strong\u003e and an integrated\n    \u003cstrong\u003eparking-lock mechanism\u003c\/strong\u003e.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eAvailable as Left, Right, or Pair\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eLong-pull mechanical brake-lever design\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eIntegrated parking lock\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eIntegrated motor-cutoff switch\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e56 cm electrical cable on each lever\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eMatched SINET™ electrical connector\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    These e-brake levers are designed exclusively for\n    \u003cstrong\u003ecurrent SINET™ systems\u003c\/strong\u003e. They are not compatible with\n    previous-generation E-BikeKit brake-lever wiring, Legacy wiring harnesses,\n    Rescue Pack systems, or third-party electrical systems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    SINET™ locking e-brake levers perform three functions in one component:\n    mechanical brake operation, motor cutoff, and parking-brake lock.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    When either brake lever is pulled, the integrated electrical switch sends a\n    cutoff signal through the SINET™ wiring system to stop motor power while\n    braking.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The locking mechanism allows the brake lever to be held in the applied\n    position while parked. This is particularly useful on adult trikes and\n    recumbent trikes, where a parking brake helps prevent the trike from rolling.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Choose a \u003cstrong\u003eLeft Lever\u003c\/strong\u003e, \u003cstrong\u003eRight Lever\u003c\/strong\u003e, or\n    \u003cstrong\u003ePair (Left \u0026amp; Right)\u003c\/strong\u003e depending on what you need to replace\n    or install.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eAvailable Options\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003ePair (Left \u0026amp; Right)\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne left-side SINET™ locking e-brake lever\u003c\/li\u003e\n    \u003cli\u003eOne right-side SINET™ locking e-brake lever\u003c\/li\u003e\n    \u003cli\u003eParking lock and motor cutoff on both levers\u003c\/li\u003e\n    \u003cli\u003e56 cm electrical cable on each lever\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eLeft Lever\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne left-side long-pull mechanical e-brake lever\u003c\/li\u003e\n    \u003cli\u003eIntegrated parking lock\u003c\/li\u003e\n    \u003cli\u003eIntegrated motor cutoff\u003c\/li\u003e\n    \u003cli\u003e56 cm electrical cable\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eRight Lever\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne right-side long-pull mechanical e-brake lever\u003c\/li\u003e\n    \u003cli\u003eIntegrated parking lock\u003c\/li\u003e\n    \u003cli\u003eIntegrated motor cutoff\u003c\/li\u003e\n    \u003cli\u003e56 cm electrical cable\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eBrake \u0026amp; Safety Functions\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eMechanical Braking:\u003c\/strong\u003e\n      Long-pull lever geometry for compatible mechanical cable-operated brake systems\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      \u003cstrong\u003eMotor Cutoff:\u003c\/strong\u003e\n      Sends a cutoff signal to the SINET™ controller when the brake lever is pulled\n    \u003c\/li\u003e\n\n    \u003cli\u003e\n      \u003cstrong\u003eParking Lock:\u003c\/strong\u003e\n      Holds the brake lever in the applied position to help keep a bike or trike\n      stationary while parked\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant:\u003c\/strong\u003e The parking lock is a parking aid. It does not\n    replace proper parking practices, wheel chocks where appropriate, or regular\n    brake inspection and adjustment.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eCurrent SINET™ integrated controllers\u003c\/li\u003e\n    \u003cli\u003eCurrent SINET™ external controllers\u003c\/li\u003e\n    \u003cli\u003eCurrent SINET™ main wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eCompatible mechanical cable-operated brake systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit or E-TrikeKit brake-lever wiring\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eLegacy Rescue Pack electrical systems\u003c\/li\u003e\n    \u003cli\u003eThird-party controllers or wiring systems\u003c\/li\u003e\n    \u003cli\u003eHydraulic brake systems\u003c\/li\u003e\n    \u003cli\u003eShort-pull brake applications unless confirmed compatible\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eThese are long-pull mechanical brake levers.\u003c\/strong\u003e\n    Confirm that your brake system requires long-pull lever geometry before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrake Type:\u003c\/strong\u003e Mechanical cable-operated\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLever Pull:\u003c\/strong\u003e Long pull\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eParking Lock:\u003c\/strong\u003e Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMotor Cutoff:\u003c\/strong\u003e Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 56 cm per lever\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSide Options:\u003c\/strong\u003e Left, Right, or Pair\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eElectrical Connection:\u003c\/strong\u003e Matched SINET™ connector\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003ePair (Left \u0026amp; Right):\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne left SINET™ locking e-brake lever\u003c\/li\u003e\n    \u003cli\u003eOne right SINET™ locking e-brake lever\u003c\/li\u003e\n    \u003cli\u003ePre-installed 56 cm cutoff cable and connector on each lever\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eLeft Lever:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne left SINET™ locking e-brake lever\u003c\/li\u003e\n    \u003cli\u003ePre-installed 56 cm cutoff cable and SINET™ connector\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eRight Lever:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eOne right SINET™ locking e-brake lever\u003c\/li\u003e\n    \u003cli\u003ePre-installed 56 cm cutoff cable and SINET™ connector\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eConfirm the brake system uses mechanical cables and long-pull lever geometry\u003c\/li\u003e\n    \u003cli\u003eInstall the correct lever on the left or right side of the handlebar\u003c\/li\u003e\n    \u003cli\u003eConnect the cutoff cable only to the matching SINET™ wiring harness\u003c\/li\u003e\n    \u003cli\u003eAdjust cable tension and brake operation before riding\u003c\/li\u003e\n    \u003cli\u003eTest motor cutoff operation after installation\u003c\/li\u003e\n    \u003cli\u003eTest the parking-lock function before riding\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Proper brake adjustment, cable routing, lever position, and motor-cutoff\n    testing are essential for safe operation.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether these levers are compatible with your brake system or\n    E-BikeKit electronics? Contact us before ordering and we'll help identify\n    the correct component.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"ebikekit","offers":[{"title":"Pair (Left \u0026 Right)","offer_id":67594720936104,"sku":"SINET-EBRAKE-SET","price":44.0,"currency_code":"USD","in_stock":true},{"title":"Left Lever","offer_id":67594720968872,"sku":"SINET-EBRAKE-LEFT","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Right Lever","offer_id":67594721001640,"sku":"SINET-EBRAKE-RIGHT","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-EBRAKE-PAIR_9771bfd3-7bb5-4e67-be58-befbdceaba46.png?v=1790946976"},{"product_id":"sinet-accessory-cable","title":"SINET™ Accessory Cable","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Accessory Cable\u003c\/strong\u003e is the main\n    rider-control wiring harness used with current E-BikeKit SINET™ electric\n    bike and trike conversion systems.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    It connects the SINET™ controller to the LCD, thumb throttle, and both\n    locking e-brake levers using factory-installed waterproof connectors for\n    a clean, reliable installation.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eDesigned exclusively for current E-BikeKit SINET™ systems\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eFactory-installed waterproof connectors\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eOne controller connection\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDedicated LCD connection\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDedicated thumb-throttle connection\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDedicated left and right e-brake connections\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This accessory cable is designed exclusively for current\n    \u003cstrong\u003eSINET™ electrical systems\u003c\/strong\u003e. It is not compatible with\n    previous-generation E-BikeKit or E-TrikeKit wiring, Legacy Rescue Pack\n    systems, or third-party electrical systems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eSINET™ Accessory Cable\u003c\/strong\u003e provides the primary connection\n    between the SINET™ controller and the rider controls mounted on the\n    handlebars.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    A single controller-side connection branches into dedicated connections\n    for the SINET™ 3.5″ Color LCD, thumb throttle, left locking e-brake lever,\n    and right locking e-brake lever.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Each connector is keyed and matched to its SINET™ component to simplify\n    installation and help prevent incorrect connections.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    If you are replacing an older E-BikeKit wiring harness and are unsure\n    whether your system is SINET™ or Legacy, contact us before ordering.\n    Photos of your existing controller, display, and connectors can help us\n    identify the correct component.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eConnections\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The SINET™ Accessory Cable provides one controller connection and\n    dedicated connections for each rider control:\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eSINET™ Controller\u003c\/li\u003e\n    \u003cli\u003eSINET™ 3.5″ Color LCD\u003c\/li\u003e\n    \u003cli\u003eSINET™ Thumb Throttle\u003c\/li\u003e\n    \u003cli\u003eLeft SINET™ Locking E-Brake Lever\u003c\/li\u003e\n    \u003cli\u003eRight SINET™ Locking E-Brake Lever\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Each connector is keyed to help ensure proper installation and reliable\n    system operation.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ Integrated Controller\u003c\/li\u003e\n    \u003cli\u003eSINET™ External Controller\u003c\/li\u003e\n    \u003cli\u003eSINET™ 3.5″ Color LCD\u003c\/li\u003e\n    \u003cli\u003eSINET™ Thumb Throttle\u003c\/li\u003e\n    \u003cli\u003eSINET™ Locking E-Brake Levers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit or E-TrikeKit wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit controllers\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit or E-TrikeKit LCDs and controls\u003c\/li\u003e\n    \u003cli\u003eLegacy Rescue Pack electrical systems\u003c\/li\u003e\n    \u003cli\u003eThird-party electrical systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connectors alone do not confirm compatibility.\u003c\/strong\u003e\n    All connected electrical components must belong to the current SINET™\n    platform.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHarness Type:\u003c\/strong\u003e Main rider-control accessory cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eController Connection:\u003c\/strong\u003e One\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLCD Connection:\u003c\/strong\u003e One\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThumb Throttle Connection:\u003c\/strong\u003e One\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLeft E-Brake Connection:\u003c\/strong\u003e One\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRight E-Brake Connection:\u003c\/strong\u003e One\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Waterproof keyed SINET™ connectors\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eOne SINET™ Accessory Cable\u003c\/li\u003e\n    \u003cli\u003eFactory-installed waterproof connectors\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Controller, LCD, throttle, e-brake levers, and other SINET™ components\n    are sold separately unless included as part of a complete conversion system.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eDisconnect the battery before installation\u003c\/li\u003e\n    \u003cli\u003eConnect only to current SINET™ components\u003c\/li\u003e\n    \u003cli\u003eMatch each keyed connector to the appropriate component\u003c\/li\u003e\n    \u003cli\u003eVerify all connectors are fully seated before powering the system\u003c\/li\u003e\n    \u003cli\u003eRoute the harness away from steering pivots, moving parts, and sharp edges\u003c\/li\u003e\n    \u003cli\u003eSecure excess cable using appropriate cable ties\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Proper cable routing helps prevent abrasion, connector strain, and\n    long-term electrical problems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether your system uses SINET™ or Legacy wiring?\n    Contact us before ordering and we'll help identify the correct harness.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"ebikekit","offers":[{"title":"Default Title","offer_id":67594773954728,"sku":"SINET-CABLE-ACCESSORY","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-COMPONENT-CABLE_48dfa361-ef60-415b-8edc-b3ad167c732f.png?v=1790848645"},{"product_id":"sinet-motor-cable","title":"SINET™ Motor Cable","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Motor Cable\u003c\/strong\u003e connects the hub motor directly\n    to the controller using matched waterproof connectors.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    This is the standard \u003cstrong\u003e67″ motor cable\u003c\/strong\u003e used throughout current\n    E-BikeKit SINET™ conversion systems and complete electric trike systems.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e67″ overall cable length\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e10.4 mm waterproof connector on both ends\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e9-pin motor connection\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eFactory-terminated phase and hall wiring\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eMolded, weather-resistant connectors\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eNo variants or connector options\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eCompatibility Note:\u003c\/strong\u003e\n    This cable is standard equipment for current SINET™ systems, but it may also\n    be used with certain previous-generation E-BikeKit systems that use the same\n    \u003cstrong\u003e10.4 mm, 9-pin connector on both the controller and motor sides\u003c\/strong\u003e.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    It is \u003cstrong\u003enot compatible with many Legacy direct-drive motor systems\u003c\/strong\u003e,\n    which commonly use a larger motor-side connector, an 8-pin connection, or a\n    different wiring configuration.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eSINET™ Motor Cable\u003c\/strong\u003e provides the electrical connection\n    between the E-BikeKit controller and compatible hub motor.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Both ends use the same 10.4 mm, 9-pin waterproof connector, with the internal\n    phase and hall wiring factory-terminated for the matching E-BikeKit motor and\n    controller architecture.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The molded waterproof connectors help protect the electrical connection from\n    normal outdoor riding conditions while simplifying installation and service.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    If you are replacing a cable on an older E-BikeKit system, do not order based\n    on appearance alone. Confirm the \u003cstrong\u003econnector diameter, pin count, cable\n    length, and motor type\u003c\/strong\u003e before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eConnections\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eController Side:\u003c\/strong\u003e 10.4 mm waterproof 9-pin connector\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMotor Side:\u003c\/strong\u003e 10.4 mm waterproof 9-pin connector\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 67″\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInternal Wiring:\u003c\/strong\u003e Factory phase and hall wiring\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector Style:\u003c\/strong\u003e Molded weather-resistant plugs\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Both ends use the same 10.4 mm, 9-pin connector.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ complete trike systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ Integrated Controllers\u003c\/li\u003e\n    \u003cli\u003eSINET™ External Controllers\u003c\/li\u003e\n    \u003cli\u003eCurrent SINET™ hub motors using the 10.4 mm, 9-pin connector\u003c\/li\u003e\n    \u003cli\u003e\n      Compatible Legacy E-BikeKit systems using 10.4 mm, 9-pin connectors\n      on both the controller and motor sides\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit systems using incompatible direct-drive motor connections\u003c\/li\u003e\n    \u003cli\u003eMotors using a 14.7 mm motor-side connector\u003c\/li\u003e\n    \u003cli\u003eLegacy 8-pin motor connections\u003c\/li\u003e\n    \u003cli\u003eSystems using different pin assignments or internal wiring\u003c\/li\u003e\n    \u003cli\u003eThird-party electrical systems unless compatibility has been confirmed\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connector appearance alone does not guarantee compatibility.\u003c\/strong\u003e\n    Always compare the connector diameter, pin count, cable length, and motor type\n    with the existing system before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e Motor-to-controller cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 67″\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eController Connector:\u003c\/strong\u003e 10.4 mm waterproof 9-pin\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMotor Connector:\u003c\/strong\u003e 10.4 mm waterproof 9-pin\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector Construction:\u003c\/strong\u003e Molded, weather-resistant\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInternal Wiring:\u003c\/strong\u003e Factory phase and hall wiring\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e None\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eOne 67″ SINET™ Motor Cable\u003c\/li\u003e\n    \u003cli\u003eFactory-installed 10.4 mm, 9-pin waterproof connectors on both ends\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eDisconnect the battery before installation\u003c\/li\u003e\n    \u003cli\u003eVerify the motor and controller both use 10.4 mm, 9-pin connectors\u003c\/li\u003e\n    \u003cli\u003eAlign connector arrows and pins before joining the plugs\u003c\/li\u003e\n    \u003cli\u003eDo not twist, force, or partially connect the plugs\u003c\/li\u003e\n    \u003cli\u003ePush connectors together fully to the indicated insertion line\u003c\/li\u003e\n    \u003cli\u003eRoute the cable away from moving parts, steering pivots, tires, chains, and sharp edges\u003c\/li\u003e\n    \u003cli\u003eSecure the cable with appropriate cable ties without placing strain on the connectors\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    After installation, verify normal motor operation before returning the bike\n    or trike to service.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Replacing a motor cable on an older E-BikeKit system?\n    Contact us before ordering if you are unsure which connector version you have.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Clear photos of the controller-side connector, motor-side connector, and motor\n    are usually enough for us to help identify the correct cable.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"ebikekit","offers":[{"title":"Default Title","offer_id":67594789814440,"sku":"SINET-CABLE-MOTOR","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-MOTOR-CABLE_7a0808af-559e-4f28-aa43-121978054b95.png?v=1790848645"},{"product_id":"sinet-cable-torque-59cm","title":"SINET™ Torque Sensor Extension Cable – 59 cm","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Torque Sensor Extension Cable\u003c\/strong\u003e adds\n    \u003cstrong\u003e59 cm of cable length\u003c\/strong\u003e between a compatible SINET™ bottom\n    bracket torque sensor and the SINET™ electrical system.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    It provides additional reach for cleaner cable routing on larger bicycle\n    frames, adult trikes, recumbent trikes, and other installations where the\n    standard torque-sensor cable does not comfortably reach the system connection.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003e59 cm extension length\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDesigned specifically for SINET™ bottom bracket torque sensors\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eMatched waterproof SINET™ connectors\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eUseful for larger frames, trikes, and recumbents\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eHelps reduce cable and connector strain\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eFactory-terminated plug-and-play cable\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This extension cable is designed exclusively for the current E-BikeKit\n    \u003cstrong\u003eSINET™ bottom bracket torque-sensor system\u003c\/strong\u003e. It is not\n    compatible with Legacy E-BikeKit pedal-assist sensors or wiring,\n    SINET™ cadence sensors, Rescue Pack systems, or third-party torque sensors.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eSINET™ Torque Sensor Extension Cable\u003c\/strong\u003e is used when\n    additional distance is needed between the bottom bracket torque sensor\n    and its matching SINET™ electrical connection.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The additional 59 cm of cable makes it easier to route the torque-sensor\n    wiring cleanly along longer or unusually shaped frames without stretching\n    the original sensor cable or placing unnecessary strain on the connectors.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Both ends are factory terminated with matched waterproof SINET™ connectors,\n    making installation plug-and-play on compatible systems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eCommon Applications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Additional cable length can be especially useful on:\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eRecumbent bicycles with long frame routing\u003c\/li\u003e\n    \u003cli\u003eTadpole trikes\u003c\/li\u003e\n    \u003cli\u003eDelta trikes\u003c\/li\u003e\n    \u003cli\u003eAdult tricycles\u003c\/li\u003e\n    \u003cli\u003eLarge or unusually shaped bicycle frames\u003c\/li\u003e\n    \u003cli\u003eInstallations where the standard torque-sensor cable would otherwise be stretched or poorly routed\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Proper cable length helps keep wiring away from chains, crankarms,\n    steering components, tires, and other moving parts.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ complete trike systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ bottom bracket torque sensors\u003c\/li\u003e\n    \u003cli\u003eSINET™ integrated-controller systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ external-controller systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit pedal-assist sensors\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eSINET™ cadence sensors\u003c\/li\u003e\n    \u003cli\u003eLegacy Rescue Pack systems\u003c\/li\u003e\n    \u003cli\u003eThird-party torque sensors or electrical systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connector shape alone does not confirm compatibility.\u003c\/strong\u003e\n    Verify that both the torque sensor and electrical system are current\n    SINET™ components before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bottom bracket torque-sensor extension cable\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtension Length:\u003c\/strong\u003e 59 cm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSensor Compatibility:\u003c\/strong\u003e SINET™ bottom bracket torque sensor\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Matched waterproof SINET™ connectors\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Plug-and-play\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e None\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eOne 59 cm SINET™ Torque Sensor Extension Cable\u003c\/li\u003e\n    \u003cli\u003eFactory-installed waterproof connectors\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eDisconnect the battery before installation\u003c\/li\u003e\n    \u003cli\u003eConnect only to a compatible SINET™ bottom bracket torque sensor\u003c\/li\u003e\n    \u003cli\u003eAlign connector arrows and pins before joining the plugs\u003c\/li\u003e\n    \u003cli\u003eDo not twist, force, or partially connect the plugs\u003c\/li\u003e\n    \u003cli\u003eRoute the cable away from the chain, crankarms, steering components, tires, and sharp edges\u003c\/li\u003e\n    \u003cli\u003eLeave enough slack for frame movement and steering without creating loose cable loops\u003c\/li\u003e\n    \u003cli\u003eSecure the cable with appropriate cable ties without placing strain on the connectors\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    After installation, verify correct torque-sensor operation and proportional\n    pedal assistance before riding.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether this extension cable is compatible with your pedal-assist\n    sensor? Contact us before ordering and we'll help identify the correct component.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"E-BikeKit","offers":[{"title":"Default Title","offer_id":67595043602600,"sku":"SINET-CABLE-TORQUE-59CM","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-PAS-EXTENSION.png?v=1790954488"},{"product_id":"sinet-bottom-bracket-torque-sensor-68-mm","title":"SINET™ Bottom Bracket Torque Sensor – 68 mm","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eSINET™ Bottom Bracket Torque Sensor\u003c\/strong\u003e provides smooth,\n    proportional pedal assistance by measuring both rider pedaling force and\n    crank rotation.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Unlike a basic cadence sensor that only detects crank movement, the torque\n    sensor adjusts motor assistance in response to how hard the rider is pedaling.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    This sensor is designed for bicycles and trikes with a\n    \u003cstrong\u003e68 mm threaded bottom bracket shell\u003c\/strong\u003e and requires a compatible\n    \u003cstrong\u003esquare-taper crankset\u003c\/strong\u003e.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eMeasures rider pedaling force and crank rotation\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eProvides smooth, proportional pedal assistance\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eFits a 68 mm threaded bottom bracket shell\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eRequires compatible square-taper crankarms\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDesigned for current E-BikeKit SINET™ systems\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eIncludes protective cable-routing grommet\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e59 cm torque-sensor extension cable sold separately\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Installation Notice:\u003c\/strong\u003e\n    Installation requires removal of the existing bottom bracket and drilling a\n    cable-routing hole in the bottom bracket shell. The included grommet must be\n    installed in the drilled opening to protect the sensor cable from the frame.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This sensor is designed for current E-BikeKit SINET™ systems and is not a\n    direct replacement for Legacy E-BikeKit pedal-assist components.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow Torque-Sensing Pedal Assist Works\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The SINET™ torque sensor measures force applied through the crankset while\n    also detecting crank rotation.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The SINET™ controller uses this information to regulate motor output according\n    to rider effort and the selected pedal-assist level.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    This creates a more natural riding experience than cadence-only pedal assist:\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLight pedaling produces lighter motor assistance\u003c\/li\u003e\n    \u003cli\u003eStronger pedaling produces greater motor assistance\u003c\/li\u003e\n    \u003cli\u003eAssistance responds progressively instead of switching on at a fixed output\u003c\/li\u003e\n    \u003cli\u003eLow-speed starts and transitions between assist levels feel smoother\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Exact assistance response depends on LCD assist level, controller programming,\n    gearing, rider input, and operating conditions.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eFitment Requirements\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBottom Bracket Shell Width:\u003c\/strong\u003e 68 mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBottom Bracket Type:\u003c\/strong\u003e Threaded\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCrank Interface:\u003c\/strong\u003e Square taper\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCrank Compatibility:\u003c\/strong\u003e Requires compatible square-taper crankarms\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eElectrical Platform:\u003c\/strong\u003e Current E-BikeKit SINET™ system\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrame Modification:\u003c\/strong\u003e Cable-routing hole must be drilled in the bottom bracket shell\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Protection:\u003c\/strong\u003e Included grommet must be installed in the drilled opening\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant:\u003c\/strong\u003e\n    Confirm the frame has a 68 mm threaded bottom bracket shell and sufficient\n    internal clearance before installation.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    This sensor is not intended for press-fit bottom brackets, external-bearing\n    crank systems, one-piece cranks, oversized bottom bracket shells, or\n    incompatible crank interfaces.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ complete trike systems\u003c\/li\u003e\n    \u003cli\u003e68 mm threaded bottom bracket shells\u003c\/li\u003e\n    \u003cli\u003eCompatible square-taper cranksets and crankarms\u003c\/li\u003e\n    \u003cli\u003eSINET™ integrated-controller systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ external-controller systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit pedal-assist systems\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit controllers or wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eCadence-only pedal-assist connections\u003c\/li\u003e\n    \u003cli\u003ePress-fit bottom bracket systems\u003c\/li\u003e\n    \u003cli\u003eExternal-bearing crank systems\u003c\/li\u003e\n    \u003cli\u003eOne-piece crank systems without the appropriate crank conversion\u003c\/li\u003e\n    \u003cli\u003eThird-party electrical systems unless compatibility has been confirmed\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connector appearance alone does not confirm compatibility.\u003c\/strong\u003e\n    Verify both the complete SINET™ electrical platform and mechanical fit before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Bottom bracket torque and cadence sensor\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBottom Bracket Fit:\u003c\/strong\u003e 68 mm threaded shell\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCrank Interface:\u003c\/strong\u003e Square taper\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePedal-Assist Function:\u003c\/strong\u003e Proportional torque-sensing assistance\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Routing:\u003c\/strong\u003e Through drilled opening in bottom bracket shell\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Grommet:\u003c\/strong\u003e Included\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtension Cable:\u003c\/strong\u003e Sold separately\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e None\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eOne SINET™ 68 mm bottom bracket torque sensor\u003c\/li\u003e\n    \u003cli\u003eOne protective cable-routing grommet\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCrankarms\u003c\/li\u003e\n    \u003cli\u003eCrankset\u003c\/li\u003e\n    \u003cli\u003eBottom bracket tools\u003c\/li\u003e\n    \u003cli\u003eDrill or drilling tools\u003c\/li\u003e\n    \u003cli\u003e\n      \u003ca href=\"\/products\/sinet-cable-torque-59cm\"\u003e\n        SINET™ Torque Sensor Extension Cable – 59 cm\n      \u003c\/a\u003e\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eDisconnect and remove the battery before beginning installation\u003c\/li\u003e\n    \u003cli\u003eConfirm the frame uses a 68 mm threaded bottom bracket shell\u003c\/li\u003e\n    \u003cli\u003eRemove the existing crankarms and bottom bracket using the correct bicycle tools\u003c\/li\u003e\n    \u003cli\u003eConfirm the replacement crankarms use a compatible square-taper interface\u003c\/li\u003e\n    \u003cli\u003eSelect a cable-routing location that avoids welds, frame joints, structural reinforcements, and internal interference\u003c\/li\u003e\n    \u003cli\u003eDrill the required cable-routing hole using proper tools and installation practices\u003c\/li\u003e\n    \u003cli\u003eDeburr the opening and install the included grommet before routing the sensor cable\u003c\/li\u003e\n    \u003cli\u003eDo not route the cable through an unprotected metal opening\u003c\/li\u003e\n    \u003cli\u003eInstall and tighten the torque sensor according to required bottom bracket orientation and torque specifications\u003c\/li\u003e\n    \u003cli\u003eRoute the cable away from chainrings, crankarms, chains, steering components, tires, and sharp edges\u003c\/li\u003e\n    \u003cli\u003eAlign connector arrows and pins before joining the plugs\u003c\/li\u003e\n    \u003cli\u003eDo not twist or force the connectors\u003c\/li\u003e\n    \u003cli\u003eVerify crank clearance and proportional pedal-assist operation after installation\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eProfessional Installation Recommended:\u003c\/strong\u003e\n    This installation requires bicycle drivetrain service and permanent frame\n    modification. It should be completed by a qualified bicycle or electric-bike\n    technician familiar with bottom bracket installation, cable routing, and frame\n    modification.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eExtension Cable\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The standard sensor cable may not provide sufficient routing length for every\n    frame configuration.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Larger bicycle frames, upright trikes, and recumbent trikes commonly require\n    additional cable length.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The\n    \u003ca href=\"\/products\/sinet-cable-torque-59cm\"\u003e\n      \u003cstrong\u003eSINET™ Torque Sensor Extension Cable – 59 cm\u003c\/strong\u003e\n    \u003c\/a\u003e\n    is available separately and provides additional reach for cleaner routing\n    with less strain on the cable and connectors.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003ca href=\"\/products\/sinet-cable-torque-59cm\"\u003e\n      Add the SINET™ Torque Sensor Extension Cable to your order.\n    \u003c\/a\u003e\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether your bottom bracket and crankset are compatible?\n    Contact us before ordering and we can help identify whether this torque sensor\n    is appropriate for your bike or trike.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Clear photos of the crankset and bottom bracket area are especially helpful\n    for fitment questions.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"E-BikeKit","offers":[{"title":"Default Title","offer_id":67595088920744,"sku":"SINET-PAS-TORQUE-68MM","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-BOTTOM-BRACKET-TORQE-SENSOR-68MM-2.png?v=1790954730"},{"product_id":"products-sinet-left-side-cadence-pedal-assist-sensor","title":"SINET™ Left-Side Cadence Pedal Assist Sensor with 12-Magnet Disc","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Left-Side Cadence Pedal Assist Sensor\u003c\/strong\u003e\n    activates pedal assistance by detecting crank rotation through a\n    12-magnet split disc installed on the left side of the crank.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    This external sensor mounts to the frame with zip ties and works with current\n    E-BikeKit SINET™ systems to provide simple, reliable cadence-based pedal assist.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eExternal left-side pedal-assist sensor\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eIncludes 12-magnet split disc\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDetects crank rotation to activate pedal assistance\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eSensor mounts externally with zip ties\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eSplit disc installs on the left side of the crank\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eRecommended sensor gap: approximately 2 mm or less\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDesigned for current E-BikeKit SINET™ systems\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eNo bottom bracket removal or frame drilling required for most installations\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This sensor is designed for current \u003cstrong\u003eSINET™ electrical systems\u003c\/strong\u003e.\n    It is not compatible with Legacy E-BikeKit pedal-assist wiring, Legacy controllers,\n    Rescue Pack systems, or third-party electrical systems unless compatibility has\n    specifically been confirmed.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eHow Cadence Pedal Assist Works\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The 12-magnet disc rotates with the crank. As the magnets pass the external\n    sensor, the sensor sends a signal to the SINET™ controller confirming that the\n    rider is pedaling.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Once the required crank movement is detected, the controller provides motor\n    assistance according to the pedal-assist level selected on the LCD.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003ePedaling rotation activates assistance\u003c\/li\u003e\n    \u003cli\u003eStopping the crank stops the pedal-assist signal\u003c\/li\u003e\n    \u003cli\u003eThe selected LCD assist level determines programmed motor output\u003c\/li\u003e\n    \u003cli\u003eThe sensor does not measure how hard the rider is pedaling\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    Compared with a bottom bracket torque sensor, cadence sensing is generally\n    simpler to install but does not provide proportional assistance based on rider effort.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eFitment Requirements\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation Side:\u003c\/strong\u003e Left side of crank\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSensor Mounting:\u003c\/strong\u003e External frame mounting with zip ties\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMagnet Disc:\u003c\/strong\u003e 12-magnet split disc\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisc Installation:\u003c\/strong\u003e Left side of crank\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRecommended Sensor Gap:\u003c\/strong\u003e Approximately 2 mm or less\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eElectrical Platform:\u003c\/strong\u003e Current E-BikeKit SINET™ system\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCrank Clearance:\u003c\/strong\u003e Sufficient space for the disc to rotate without contact\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrame Clearance:\u003c\/strong\u003e Suitable mounting location close enough to the magnet disc\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant:\u003c\/strong\u003e\n    Confirm there is adequate clearance between the left crankarm, bottom bracket area,\n    frame, sensor, and magnet disc before installation.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ complete trike systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ integrated-controller systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ external-controller systems\u003c\/li\u003e\n    \u003cli\u003eCompatible bicycles and trikes with sufficient left-side crank and frame clearance\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit pedal-assist systems\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit controllers or wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eSINET™ bottom bracket torque-sensor connections\u003c\/li\u003e\n    \u003cli\u003eThird-party electrical systems unless compatibility has been confirmed\u003c\/li\u003e\n    \u003cli\u003eInstallations without adequate clearance for the sensor and magnet disc\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connector appearance alone does not confirm compatibility.\u003c\/strong\u003e\n    Verify the complete electrical platform before ordering.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e External cadence pedal-assist sensor\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInstallation Side:\u003c\/strong\u003e Left\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSensor Mounting:\u003c\/strong\u003e External frame mounting with zip ties\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMagnet Disc:\u003c\/strong\u003e 12-magnet split disc\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDisc Installation:\u003c\/strong\u003e Left side of crank\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRecommended Sensor Gap:\u003c\/strong\u003e Approximately 2 mm or less\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePedal-Assist Function:\u003c\/strong\u003e Crank-rotation detection\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTorque Measurement:\u003c\/strong\u003e No\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrame Drilling Required:\u003c\/strong\u003e No, under normal installation conditions\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e None\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eOne SINET™ left-side external cadence sensor\u003c\/li\u003e\n    \u003cli\u003eOne 12-magnet split pedal-assist disc\u003c\/li\u003e\n    \u003cli\u003eInstallation zip ties\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Included:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCrankarms\u003c\/li\u003e\n    \u003cli\u003eCrankset\u003c\/li\u003e\n    \u003cli\u003eController\u003c\/li\u003e\n    \u003cli\u003eLCD\u003c\/li\u003e\n    \u003cli\u003eWiring harness\u003c\/li\u003e\n    \u003cli\u003eBottom bracket torque sensor\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eDisconnect and remove the battery before beginning installation\u003c\/li\u003e\n    \u003cli\u003eInstall the 12-magnet split disc on the left side of the crank\u003c\/li\u003e\n    \u003cli\u003eVerify the disc is fully seated, centered, and rotates without contact\u003c\/li\u003e\n    \u003cli\u003eMount the external sensor securely to the frame using the included zip ties\u003c\/li\u003e\n    \u003cli\u003ePosition the sensing face toward the magnets\u003c\/li\u003e\n    \u003cli\u003eMaintain a gap of approximately 2 mm or less between sensor and disc\u003c\/li\u003e\n    \u003cli\u003eConfirm the magnet disc passes through the active sensing area during crank rotation\u003c\/li\u003e\n    \u003cli\u003eRoute the cable away from crankarms, chainrings, chains, steering components, tires, and sharp edges\u003c\/li\u003e\n    \u003cli\u003eAlign connector arrows and pins before joining the plugs\u003c\/li\u003e\n    \u003cli\u003eDo not twist or force the connectors\u003c\/li\u003e\n    \u003cli\u003eRotate the crank by hand and confirm the disc and sensor do not contact each other\u003c\/li\u003e\n    \u003cli\u003eTest pedal-assist engagement and cutoff before riding\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eAdjustment Note:\u003c\/strong\u003e\n    If pedal assist does not activate consistently, first verify sensor direction,\n    magnet-disc orientation, alignment, and the distance between the sensor and disc.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eCadence Sensor vs. Torque Sensor\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The cadence sensor and bottom bracket torque sensor provide two different\n    pedal-assist experiences.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eCadence Sensor:\u003c\/strong\u003e\n      Detects crank rotation and activates the programmed assistance assigned to the\n      selected pedal-assist level.\n    \u003c\/li\u003e\n    \u003cli\u003e\n      \u003cstrong\u003eTorque Sensor:\u003c\/strong\u003e\n      Measures rider effort and adjusts assistance proportionally to pedaling force.\n    \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    The external cadence sensor is generally simpler to install because it does not\n    require bottom bracket replacement or drilling a cable-routing hole in the frame.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether this cadence sensor will fit your bike or trike?\n    Contact us before ordering and we can help review the crank and frame clearance.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Clear photos of the left-side crank and bottom bracket area are especially helpful.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"E-BikeKit","offers":[{"title":"Default Title","offer_id":67595101175976,"sku":"SINET-PAS-CADENCE-LH","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-CADENCE-SENSOR-LEFT-SIDE.png?v=1790955180"},{"product_id":"sinet-thumb-throttle","title":"SINET™ Thumb Throttle","description":"\u003cdetails class=\"product-accordion\" open\u003e\n  \u003csummary\u003e\u003cstrong\u003eOverview\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eE-BikeKit SINET™ Thumb Throttle\u003c\/strong\u003e provides smooth,\n    precise throttle control for current E-BikeKit SINET™ electric bike\n    and trike conversion systems.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Its low-profile thumb-operated design allows responsive acceleration\n    while keeping the rider’s hand securely positioned on the handlebar.\n  \u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\u003cstrong\u003eSmooth, progressive throttle response\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eErgonomic thumb-operated design\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eQuick-release handlebar clamp\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eIPX7 waterproof rating\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e53 cm cable length\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003e3-pin male Z309AG connector\u003c\/strong\u003e\u003c\/li\u003e\n    \u003cli\u003e\u003cstrong\u003eDesigned exclusively for current SINET™ systems\u003c\/strong\u003e\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eImportant Compatibility Notice:\u003c\/strong\u003e\n    This throttle is designed exclusively for current\n    \u003cstrong\u003eE-BikeKit SINET™ electrical systems\u003c\/strong\u003e.\n    It is not compatible with Legacy E-BikeKit or E-TrikeKit controls,\n    Legacy Rescue Pack systems, or third-party controllers and wiring systems.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    The \u003cstrong\u003eSINET™ Thumb Throttle\u003c\/strong\u003e is the standard throttle control\n    used with current SINET™ conversion systems.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The thumb lever provides progressive motor control throughout its range,\n    making it easier to manage low-speed starts, maneuvering, and general riding.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    The quick-release clamp simplifies installation and service, while the\n    weather-resistant IPX7 construction and matched SINET™ connector are designed\n    for reliable use as part of the current E-BikeKit electrical platform.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eComfortable thumb lever\u003c\/li\u003e\n    \u003cli\u003eProgressive throttle output\u003c\/li\u003e\n    \u003cli\u003eQuick-release handlebar clamp\u003c\/li\u003e\n    \u003cli\u003eLow-profile control design\u003c\/li\u003e\n    \u003cli\u003eDurable construction for regular use\u003c\/li\u003e\n    \u003cli\u003eIPX7 weather-resistant design\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSINET™ System Compatibility\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ conversion systems\u003c\/li\u003e\n    \u003cli\u003eCurrent E-BikeKit SINET™ complete trike systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ integrated-controller systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ external-controller systems\u003c\/li\u003e\n    \u003cli\u003eSINET™ Accessory Cable\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eLegacy E-BikeKit or E-TrikeKit throttle wiring\u003c\/li\u003e\n    \u003cli\u003eLegacy E-BikeKit controllers or wiring harnesses\u003c\/li\u003e\n    \u003cli\u003eLegacy Rescue Pack systems\u003c\/li\u003e\n    \u003cli\u003eThird-party controllers or electrical systems\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eMatching connector appearance alone does not confirm compatibility.\u003c\/strong\u003e\n    This throttle uses a dedicated SINET™ connector and must be used as part of\n    the current SINET™ electrical platform.\n  \u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e E-BikeKit\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlatform:\u003c\/strong\u003e SINET™\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eThrottle Type:\u003c\/strong\u003e Thumb throttle\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Right-side handlebar\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e 3-pin male (Z309AG)\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 53 cm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWaterproof Rating:\u003c\/strong\u003e IPX7\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClamp:\u003c\/strong\u003e Quick-release\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVariants:\u003c\/strong\u003e None\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eOne SINET™ Thumb Throttle\u003c\/li\u003e\n    \u003cli\u003ePre-installed 53 cm cable and SINET™ connector\u003c\/li\u003e\n    \u003cli\u003eIntegrated quick-release handlebar clamp\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eDisconnect the battery before installation\u003c\/li\u003e\n    \u003cli\u003eInstall the throttle on the right side of the handlebar\u003c\/li\u003e\n    \u003cli\u003ePosition the lever for comfortable thumb operation\u003c\/li\u003e\n    \u003cli\u003eSecure the quick-release clamp\u003c\/li\u003e\n    \u003cli\u003eRoute the cable away from steering pivots, brake levers, moving parts, and sharp edges\u003c\/li\u003e\n    \u003cli\u003eConnect only to the matching SINET™ throttle connection\u003c\/li\u003e\n    \u003cli\u003eVerify full steering movement without placing tension on the cable\u003c\/li\u003e\n    \u003cli\u003eTest throttle operation before riding\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails class=\"product-accordion\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/summary\u003e\n\n  \u003cp\u003e\n    Not sure whether your system uses the current SINET™ throttle connection?\n    Contact us before ordering and we'll help identify the correct component.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    \u003cstrong\u003eQuestions?\u003c\/strong\u003e\n    Call us toll-free at\n    \u003ca href=\"tel:1-866-882-3245\"\u003e1-866-882-3245\u003c\/a\u003e,\n    Monday–Friday, 9am–5pm ET, or email\n    \u003ca href=\"mailto:support@ebikekit.com\"\u003esupport@ebikekit.com\u003c\/a\u003e.\n  \u003c\/p\u003e\n\u003c\/details\u003e","brand":"E-BikeKit","offers":[{"title":"Default Title","offer_id":67595149508776,"sku":"SINET-THROTTLE-THUMB","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/files\/E-BIKEKIT-SINET-THROTTLE_d7755733-daca-4cd1-b888-f0efa487cdc2.png?v=1790848001"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1430\/7408\/collections\/E-BIKEKIT-SINET-LCD_15967e5e-1053-46f8-849e-bca57761969e.png?v=1790957106","url":"https:\/\/www.ebikekit.com\/collections\/sinet-components.oembed","provider":"EBikeKit.com","version":"1.0","type":"link"}